/// <summary>
///     Standard meter status flags (ED_STD_STATUS1 from ST3).
/// </summary>
[Flags]
[SuppressMessage("Design", "CA1028:Enum storage should be Int32", Justification = "Wire protocol requires ushort for binary serialization.")]
[SuppressMessage("Naming", "CA1711:Identifiers should not have incorrect suffix", Justification = "This is a [Flags] enum representing protocol status flags.")]
public enum StandardStatusFlags : ushort
{
    /// <summary>No flags set.</summary>
    None = 0,
    /// <summary>Meter is unprogrammed.</summary>
    Unprogrammed = 1 << 0,
    /// <summary>Configuration error detected.</summary>
    ConfigurationError = 1 << 1,
    /// <summary>Self-check error detected.</summary>
    SelfCheckError = 1 << 2,
    /// <summary>RAM failure detected.</summary>
    RamFailure = 1 << 3,
    /// <summary>ROM failure detected.</summary>
    RomFailure = 1 << 4,
    /// <summary>Non-volatile memory failure.</summary>
    NonVolatileMemoryFailure = 1 << 5,
    /// <summary>Clock error detected.</summary>
    ClockError = 1 << 6,
    /// <summary>Measurement error detected.</summary>
    MeasurementError = 1 << 7,
    /// <summary>Low battery detected.</summary>
    LowBattery = 1 << 8,
    /// <summary>Low loss potential detected.</summary>
    LowLossPotential = 1 << 9,
    /// <summary>Demand overload detected.</summary>
    DemandOverload = 1 << 10,
    /// <summary>Power failure detected.</summary>
    PowerFailure = 1 << 11,
    /// <summary>Tamper detected.</summary>
    TamperDetect = 1 << 12,
    /// <summary>Cover removal detected.</summary>
    CoverDetect = 1 << 13
}